Rice Lake OnTrak Truck Scale Data Management - Operation Manual - Manual (Page 38)

34 OnTrak Manual
6.5 Application Setup & Configuration
The setup menu softkey is password-protected and offers access to the following:
• Display program name & version
• Display a weight widget
Parameter Default Softkey Description
System Time and Date Current Time/Date Time and Date of the 920i.
System Password “” Setup Password Changing the password that is required
for entry in the setup menu. Setting the
password to nothing will cause the system
to not prompt for a password when the
setup menu softkey is pressed.
OnTrak Timeout 30 Seconds OnTrak Timeout Allows the user to define how long to wait
for customer entry before system resets
the prompt back to Enter Truck ID.
Printer Enabled/Disabled Enabled Printer Enabled/
Disabled Allows the user to enable or disable the
monitoring of the printer DTR line. When
enabled, the program displays Error:
Printer Communication and inhibits
truck processing when the printer goes
offline.
Setup Serial Port 1 HID Reader Setup Port 1 Allows the operator to change the device
connected to serial port 1. Operator must
manually change the baud rate in the 920i
configuration menu to match the baud
rate settings of the device connected.
Inbound Kiosk/ Outbound
Kiosk Outbound Inbound/Out Allows the operator to tell OnTrak if the
kiosk is the inbound kiosk or the outbound
kiosk.
Loop Detectors On or Off Off Loops On/Off Allows the operator to turn the loop
detector functionality on or off. Note: If
there is no A/D detected in the 920i, this
softkey will not be available.