Setup com1, Datprot – Rice Lake Sartorius Midrics 1 and 2 Series - Operating Instructions User Manual
Page 40

40
Setup
Com1
2
Interface port 1 (optional)
(Display designation of this menu level: 2)
off
*
Off
datProt
Data protocol
sbi
*
SBI: standard version
5.1. Baud
rate
5.1.1
150 baud
5.1.2
300 baud
5.1.3
600 baud
5.1.4*
1200 baud
5.1.5
2400 baud
5.1.6
4800 baud
5.1.7
9600 baud
5.1.8
19,200 baud
5.2.
Parity
5.2.2
Space
2)
5.2.3
Odd
5.2.4
Even
5.2.5
None
3)
5.3.
Number of stop bits
5.3.1*
1 stop bit
5.3.2
2 stop bits
5.4.
Handshake mode
5.4.1
Software handshake
5.4.3*
Hardware handshake, 1 character after CTS
5.6.
Number of data bits
5.6.1*
7 data bits
5.6.2
8 data bits
6.1.
Data output: manual/automatic
6.1.1
Manual without stability
6.1.2*
Manual after stability
6.1.4
Automatic without stability
6.1.5
Automatic with stability
6.1.7
Protocol for computer (PC)
6.3.
Time-dependent automatic data output
6.3.1*
1 display update
6.3.2
2 display updates
6.3.4
10 display updates
6.3.7
100 display updates
7.2.
Data output: line format for printout
7.2.1
For raw data: 16 characters
7.2.2*
For other applications: 22 characters
9.1.
Restore factory settings in numeric menu COM1: SBI
9.1.1
Yes
9.1.2*
No
xbpi-232
XBPI-232
1)
Menu depends on weighing platform model
2)
not with setting 5.6.2 (8 bits)
3)
not with setting 5.6.1 (7 bits)