Rice Lake Sartorius Midrics 1 and 2 Series - Operating Instructions User Manual
Sartorius midrics, 1| midrics
This manual is related to the following products:
Table of contents
Document Outline
- Sartorius Midrics®1| Midrics® 2
- Intended Use
- Contents
- Warning and Safety Information
- General View of the Device
- Start-up
- Connecting the Weighing Platform
- Analog/Digital Converter(ADC)
- Menu Structure for ADC Configuration
- Service Menu
- Activating the Service Mode
- Configuring the A/D Converter
- Key T 2 sec FunctionAllocation
- Entering GeographicalData
- Enter Calibrationand Linearization Weights
- External Linearization
- Calibration, Adjustment
- Set Preload
- Clear Preload
- Calibration/Adjustmentwithout Weights
- Enter Serial Number of the Weighing Platform
- Operating Design
- Configuration
- Operation
- Basic Weighing Function
- Weighing
- Device Parameters
- Tare the scale
- Enter the tare value using the keypad
- Weigh with varying tare values
- Calibration and Adjustment
- Data ID Codes
- Application Programs
- Counting
- Neutral Measurement
- Averaging (Animal Weighing)
- Weighing in Percent
- Checkweighing
- Classification
- Totalizing
- Net-total Formulation
- Configuring Printouts
- Data Interface
- Error Messages
- Care and Maintenance
- Recycling
- Overview
- Appendix