Configuration, Appl – Rice Lake Sartorius Midrics 1 and 2 Series - Operating Instructions User Manual
Page 36
36
appl
W
Classification
3.8.
Start application and load most recent application data when the Midrics is switched on
3.8.1
Automatic (on)
3.8.2*
Manual (off)
3.25.
Tare function
3.25.1*
Add input value (weight value) for taring
3.25.2
Tare value can be overwritten
4.3.
Activate control line for “Set” as:
4.3.1*
“Set” output
4.3.2
Ready to operate (for process control systems)
4.7.
Activation of outputs
4.7.1
Off
4.7.2
Always active
4.7.3*
Active at stability
4.8.
Number of classes
4.8.1*
3 classes
4.8.2
5 classes
4.9.
Parameter input
4.9.1*
Weight values
4.9.2
Percentage
4.10. Automatic
printing
4.10.1*
Off
4.10.2
On
9.1.
Factory settings for all application programs
9.1.1
Yes
9.1.2*
No
L
Weighing in Percent
3.5.
Minimum load for automatic taring and automatic printing
Numeric menu as for Weighing
3.6.
Minimum load for initialization
Numeric menu as for Counting
3.7.
Automatic taring: first weight tared
3.7.1*
Off
3.7.2
On
3.8.
Start application and load most recent application data when the Midrics is switched on
3.8.1
Automatic (on)
3.8.2* Manual
(off)
3.9.
Resolution for calculation of reference value
3.9.1*
Display resolution
3.9.2
Display resolution + 1 decimal place
3.9.3
Display resolution + 2 decimal places
3.9.4
Internal resolution
3.10.
Decimal places in displayed result
3.10.1*
None
3.10.2
1 decimal place
3.10.3
2 decimal places
3.10.4
3 decimal places
3.11.
Parameter for saving weight values
3.11.1*
At stability
3.11.2
At increased stability
3.15.
Display
3.15.1*
Residue
3.15.2
Loss
3.25.
Tare function
3.25.1*
Add input value (weight value) for taring
3.25.2
Tare value can be overwritten
9.1.
Factory settings for all application programs
9.1.1
Yes
9.1.2*
No
Configuration