Setup wp-1 – Rice Lake Sartorius Midrics 1 and 2 Series - Operating Instructions User Manual
Page 39

39
Setup
wp-1
1
1.9.
Calibration and adjustment
1.9.1*
External calibration/adjustment; default weight
1.9.3
External calibration/adjustment; weight can be selected under menu item 1.18.1
1.9.8.
Set preload
1.9.9.
Clear preload
1.9.10
No function when you press and hold ) > 2 sec
1.10.
Calibration/adjustment sequence
1.10.1
Calibration with automatic adjustment
1.10.2*
Calibration with adjustment triggered manually
1.11.
Zero-setting range
1.11.1
1 percent/max. cap.
1.11.2*
2 percent/max.cap.
1.12.
Initial zero-setting range
1.12.2
2 percent/max. cap.
1.12.3
5 percent/max.cap. (setting depends on model)
1.12.4*
10 percent/max.cap.
1.13.
Tare/zero at power on
1.13.1*
On
1.13.2
Off, load previous tare value
1.13.3
Only zero at power on
1.16.
External calibration/adjustment
1)
1.16.1*
Accessible
1.16.2
2)
Blocked
1.17.
Calibration weight unit
1.17.1
Grams
1.17.3*
Tons
1.17.4
Pounds
1)
1.18.
Enter calibration weight
1.18.1
External user-defined weight (enter value; e.g.: 10,000 kg)
3.1.
Weight unit 2
3)
3.1.1
Grams / o
3.1.2
Grams / g
3.1.3*
Kilograms / kg
3.1.4
Carats /ct
1)
3.1.5
Pounds /lb
1)
3.1.6
Ounces /oz
1)
3.1.7
Troy ounces / ozt
1)
3.1.8
Hong Kong taels / tlh
1)
3.1.9
Singapore taels / tls
1)
3.1.10
Taiwanese taels / tlt
1)
3.1.11
Grains / GN
1)
3.1.12
Pennyweights / dwt
1)
3.1.14
Parts per pound / lb
1)
3.1.15
Chinese taels / tlc
1)
3.1.16
Mommes / mom
1)
3.1.17
Austrian carats /k
1)
3.1.18
Tola / tol
1)
3.1.19
Baht / bat
1)
3.1.20
Mesghal / MS
1)
3.1.21
Tons / t
3.1.22
Pounds:ounces (lb:oz)
1)
3.2.
Display accuracy 2
1)
3.2.1*
All digits
3.2.2
Reduced by 1 decimal place for load change
3.2.14
10-fold increased resolution
3.2.15
Resolution increased by 2 scale intervals (e.g., 5 g to 1 g)
3.2.16
Resolution increased by 1 scale interval (e.g., 2 g to 1 g or from 10 g to 5 g)
3.3.
Weight unit 3
3)
(settings as for 3.1, “Weight unit 2”)
3.4.
Display accuracy
3)
(settings as for 3.2, “Display accuracy 2”)
9.1.
Restore factory settings in WP1 numeric menu
9.1.1
Yes
9.1.2*
No
1)
= Not available on instruments verified for use in legal metrology
2)
= Factory setting on instrument verified for use in legal metrology
3)
= Menu depends on weighing platform model