Rice Lake CLS-420 Cargo Lift Scale Installation Manual - Manual (Page 56)

46 CLS-420 Installation Manual
8.6 Conversion Factors for Secondary
Units
The 420 has the capability to mathematically convert a
weight into many different types of units and instantly
display those results with a press of the
UNITS key.
Secondary units can be specified on the FORMAT
menu using the SECNDR parameter, or by using EDP
commands.
NOTES:
• Multipliers are preconfigured within the
indicator. Manual entry is only necessary when
NONE is selected under UNITS. Long tons and
grain units listed in Table 8-6 cannot be directly
specified as primary or secondary units. For
these or other unlisted units of weight, specify
NONE under UNITS.
• Ensure that the secondary decimal point position
is set appropriately for the scale capacity in the
secondary units. If the converted value requires
more digits than are available, the indicator will
display an overflow message (
OVERFL ).
• For example, if the primary units are short tons,
secondary units are pounds, and the secondary
decimal point is set to 8888.88, the indicator will
overflow if 5 tons or more are applied to the
scale. With 5 tons applied, and a conversion
factor of 2000, the secondary units display needs
five digits to the left of the decimal point to
display the 10000 lb secondary units value.
Table 8-6. Conversion Factors
Primary Unit x Multiplier Secondary Unit
grains 0.064799 grams
0.002286 ounces
0.000143 pounds
0.000065 kilograms
ounces 437.500 grains
28.3495 grams
0.06250 pounds
0.02835 kilograms
pounds 7000.00 grains
453.592 grams
16.0000 ounces
0.453592 kilograms
0.000500 short tons
0.000446 long tons
0.000453 metric tons
short tons 2000.00 pounds
907.185 kilograms
0.892857 long tons
0.907185 metric tons
grams 15.4324 grains
0.035274 ounces
0.002205 pounds
0.001000 kilograms
kilograms 15432.4 grains
35.2740 ounces
1000.00 grams
2.20462 pounds
0.001102 short tons
0.000984 long tons
0.001000 metric tons
metric tons 2204.62 pounds
1000.00 kilograms
1.10231 short tons
0.984207 long tons
long tons 2240.00 pounds
1016.05 kilograms
1.12000 short tons
1.01605 metric tons
NOTE: Multipliers in italics are preconfigured