Rice Lake CLS-420 Cargo Lift Scale Installation Manual - Manual (Page 40)

Table 5-6. Serial Menu Parameters
SERIAL Menu
Parameter Choices Description
Level 2 submenus
EDP -
dedicated to
the two
channel
iQube BAUD
BITS
TERMIN
EOLDLY
ECHO Specifies settings for baud rate, data bits, termination characters, end-of-line delay and echo
used by the EDP port.
PRINT BAUD
BITS
TERMIN
EOLDLY
ECHO Specifies settings for baud rate, data bits, termination characters, end-of-line delay, and echo
used by the printer port.
STREAM OFF
EDP
PRN Selects the serial port used for continuous transmission. See Figure 8.3 42 for information
about the 420 continuous data format.
STRRTE INDUST
LFT Specifies stream rate. Stream rate can be set to industrial or legal for trade.
PRNDES EDP
PRN Print destination. Selects the port for data transmission when the print key is pressed or the
KPRINT EDP command is sent.
PRNMSG ON
OFF Print message. Default will be ON. When the print key is pressed and data is sent out, the
word PRINT is momentarily displayed on the remote display.
SSCALE OFF
2LCELL
4LCELL By selecting this option, it enables the scale to be used by the CLS series cargo lift scale.
SS-LFT ON
OFF This parameter turns off the LFT 3 degree tilt warning.
Level 3 Submenus EDP Port and Printer Port
BAUD 9600- Printer
19200 - EDP
28800
38400
57600
115200
300
600
1200
2400
4800 Baud rate. Selects the transmission speed for the port.
BITS 8NONE
7EVEN
7ODD Selects number of data bits and parity of data transmitted or received by the port.
TERMIN CR/LF -
Printer
CR - EDP Termination character. Selects termination character for data sent from the port.
EOLDLY 000000
0–255 End-of-line delay. Sets the delay period, in 0.1-second intervals, from when a formatted line is
terminated to the beginning of the next formatted serial output. Value specified must be in the
range 0-255, in tenths of a second (10 = 1 second).
ECHO OFF - EDP
ON - Printer This command enables or disables echoing of the serial commands sent to the indicator.
30 CLS-420 Installation Manual