Rice Lake CLS-420 Cargo Lift Scale Installation Manual - Manual (Page 33)

.PWF61
*ODSFSFNFOU
7"MVF
&/5&3WBMVF
.PWF-&'5
1SFWJPVT
.PWF3*()5
/FYU
.PWF%08/
%FDSFNFOU
7BMVF
CLS-420 Installation Manual 23
Figure 5-1. Front Panel Key Functions in Setup Mode
Four front panel keys are used as directional keys to navigate through the menu in setup mode (see Figure 5-2) The
UNITS and PRINT keys scroll left and right horizontally on the same menu level; ZERO and GROSS/NET move up
and down (vertically) to different menu levels. The TARE key serves as an Enter key for selecting parameter values
within the menus. A label above each of these keys identifies the direction provided by the key when navigating
through the setup menus.
TU -FWFM
1BSBNFUFS
%FGBVMUWBMVF 7BMVF
8IFONPWJOHUISPVHIWBMVFTCFMPXUIFmSTUNFOVMFWFM
QSFTT UPSFUVSOUPUIFMFWFM
BCPWF1SFTT PS UPNPWFUPUIFOFYUQBSBNFUFSPOUIFMFWFMBCPWF
TU -FWFM
1BSBNFUFS
OE -FWFM
1BSBNFUFS
OE -FWFM
1BSBNFUFS
7BMVF 7BMVF
Figure 5-2. Setup Mode Menu Navigation
To select a parameter, press the left or the right arrow to scroll left or right until the desired menu group appears on
the display, then press the down arrow to move down to the submenu or parameter you want. When moving
through the menu parameters, the default or previously selected value appears first on the display.
To change a parameter value, scroll left or right to view the values for that parameter. When the desired value
appears on the display, press o to select the value and move back up one level. To edit numerical values, use the
navigation keys to select the digit and to increment or decrement the value or use the numeric keypad. See
Figure 5-3.
8IFOFEJUJOHOVNFSJDWBMVFT
QSFTTPSUPDIBOHFUIF
EJHJUTFMFDUFE1SFTTPSUPJODSFNFOUPSEFDSFNFOUUIF
WBMVFPGUIFTFMFDUFEEJHJU
PSVTFUIFOVNFSJDLFZQBE
1SFTTUPTBWFUIFWBMVFFOUFSFEBOESFUVSOUPUIFMFWFMBCPWF
Figure 5-3. Editing Procedure for Numeric Values