6 accumulate function, Accumulate function – Rice Lake CLS-420 Cargo Lift Scale Installation Manual User Manual
Page 42
32
CLS-420 Installation Manual
5.2.6
Accumulate Function
The accumulate function is used to add weight data to a register for later access by the user. The accumulator can
keep a running total of weights entered by manually pressing the
key when the accumulate function is
enabled (
ON
). The accumulator will accumulate displayed weight values as long as the accumulate function is
enabled and the user keeps pressing the
key.
To display the accumulated weight, press and hold the
(MODE) GROSS/NET
key for three seconds. The value will be
displayed for about 10 seconds. To clear the accumulator, press the
CLR
key twice while the accumulated value is
being displayed.
ACCUM
ON/OFF
RTZGRD
Turns the accumulator on and off. Stores the count, date & time of last accumulation.
Returns to zero grads to re-arm the accumulator.
DATE
DATFMT
DATSEP
Allows selection of date format and date separator. See level three parameter for
descriptions.
TIME
TIMFMT
TIMSEP
Allows selection of time format and separator. See level three parameter for descriptions.
Level 3 submenus
ACCESS
DISABLE
ENABLE
Operator access to piece count mode. Specify DISABLE if piece count mode will not be
used. With access disabled, pressing the GROSS/NET Mode key toggles between gross
and net modes only.
SPLSIZ
10
20
50
100
5
PCWGT
Sample size. Specify the default size used for counting scale operations. Sample size can
be changed in counting mode during sample acquisition.
ON/OFF
ON
OFF
Turns the accumulator on and off.
RTZGRD
0
Number
This is the number of grads from 0 that it has to return to re-arm the accumulator between
weighments.
DATFMT
MMDDYY
DDMMYY
YYMMDD
Specifies the format used to display or print the date.
DATSEP
SLASH
DASH
SEMI
Specifies the date separator character
TIMFMT
24HOUR
12HOUR
Specifies the format used to display or print the time
TIMSEP
COLAN
COMMA
Specifies the time separator character
Program Menu
Parameter
Choices
Description
Table 5-7. FEATURE Menu Parameters (Continued)