ProgressiveRC 6 PowerLab User Manual
Powerlab 6, User’s guide, For firmware ver. starting at 1.05
Table of contents
Document Outline
- Contents
- Using PowerLab 6
- Quick reference
- Set Smart Power Management
- Set options
- Connect packs: basic
- Connect packs: advanced
- Configuration B
- Configuration C
- Configuration D
- Configuration E
- Configuration F
- Configuration G
- Configuration H
- Power supplies
- Charge/discharge/cycle/monitor a pack
- Charge/discharge/cycle packs in parallel
- Expansion Channel Mode
- Regenerative discharge
- Modify a preset
- Manage presets
- Using the Charge Control Software
- Other information
- Charging tips
- How Auto Current Mode works
- Estimating performance factors
- FMA Wiring mode vs. XH/EH Wiring mode
- Balance connector wiring
- Open architecture presets
- LiPo factory presets
- A123 factory presets
- A123 2300 mAh Accurate Charge
- A123 2300 mAh Faster Charge
- A123 2300 mAh High Power
- A123 2300 mAh Non Bal. 1-5s
- A123 2300 mAh Non Bal 8s Fixed
- A123 1100 mAh Accurate Charge
- A123 1100 mAh Faster Charge
- A123 1100 mAh Non Bal. 1-5s
- A123 1100 mAh Non Bal 8s Fixed
- A123 All Cpcty Storage Charge
- A123 Store Non Bal. 1-5s
- A123 Store Non Bal 8s Fixed
- NiMH, NiCd and Lead Acid factory presets
- Specifications:
- Troubleshooting
- Support options
- REVOLECTRIX limited warranty