Modify a preset – ProgressiveRC 6 PowerLab User Manual
Page 34
Modify a preset
You can change many preset properties directly at PowerLab 6. Use this procedure at
any time, but it’s essential when PowerLab 6 isn’t connected to the Charge Control Soft-
ware.
Tip:
You can also use the Charge Control Software’s
to hide,
show, re-arrange, copy and modify presets.
1. In the User Preset menu, use INC or DEC to select the preset you want to modify.
Press and hold INC or DEC to scroll rapidly.
2. Press
INC
+DEC to access options.
3. At
the
Choose TASK? > Preset Settings
screen, press ENTER. You now see the
first of several settings for the preset.
4. In each property screen:
Press
INC
or DEC to select the desired value, then press ENTER to save that
value and move to the next screen.
Press
ENTER
to move to the next setting screen without changing the property.
Press
BACK
to move to the previous setting screen.
At any time, press and hold BACK to return to the User Preset menu. Property
changes you made will be applied to the preset.
5. When you see Choose TASK? > Preset Settings again, you have completed a full
pass through all properties for the preset.
6. Press
BACK
to return to the User Preset menu.
See also
34