ProgressiveRC 6 PowerLab - Manual (Page 20)

Configuration E
Summary: two PowerLabs charging separate packs, one power source.
Components:
2 PowerLabs
1 power source
2 standard adapters or Safe Parallel Adapters (1 adapter per pack)
2 packs (Safe Parallel Adapters require same cell count for both packs)
2 optional FUIM3s for computer support with 2 CCS instances
PowerLab 6 mode (Normal or Expansion Channel): Normal.
PowerLab 6 maximum charge power: up to 1000W to each pack (6s) using
30VDC/2400W power source. Standard house circuit would likely not provide enough
power; would require 240VAC power supply for full power.
Note: above illustrations may read “PowerLab 8” because for purposes of these illustrations, both
models are identical.
20