ProgressiveRC 6 PowerLab - Manual (Page 22)

Configuration G
Summary: two PowerLabs charging split pack (10s or larger), one power source,
Expansion Channel Mode.
Components:
2 PowerLabs
1 power source
2 standard adapters or Safe Parallel Adapters (1 adapter per side)
1 10s (or larger) split pack with center tap
1 optional FUIM3 for computer support
1 optional “Y” servo cable (required for Expansion Channel operation with
computer support)
Male-male servo cable (required for Expansion Channel operation)
PowerLab 6 mode: Expansion Channel.
PowerLab 6 maximum charge power: up to 1000W to each pack (6s) using
30VDC/2400W power source. Standard house circuit would likely not provide enough
power; would require 240VAC power supply for full power.
If not running in Expansion Channel mode, remove the male-mail servo cable and “Y”
servo cable, and use 2 FUIM3s and 2 CCS instances to control the PowerLabs.
(Illustration next page)
22