Mercedes-Benz G-Class 2010 COMAND Manual - Manual (Page 44)

Canceling the First or Second Part of
Individualization
X Select Cancel.
You will be prompted to confirm that you
really wish to cancel.
X Select Yes or No.
If you select Yes, individualization will be
canceled.The data from the canceled part
will be lost.
If you select
No, the canceled part of the
individualization will restart.
Deleting Existing Individualization Data
X Select System£Settings£Voice
Control£Delete
Individualization.
You will be prompted to confirm that you
really wish to delete it.
X Select Yes or No.
The individualization data will be deleted or
retained on the basis of the selection. A
corresponding message is displayed.
Switching Individualization On and Off
X Select System£Settings£Voice
Control £ Individualization On.
This switches the individualization on Ç or
off c.
Rear View Camera
COMAND shows the camera picture on the
display when
R the function is switched on in the System
Settings menu and
R
the vehicle is shifted into reverse gear
As soon as you shift out of reverse gear, the
previous display is shown.
Switching On/Off the Display of the
Rear View Camera
X Switch to System Menu
System settings menu with Rear View Camera
option
X Select Settings£Rear View Camera.
X Select Activation by R gear.
Depending on the previous state the
function is switched on Ç or offc.
Bluetooth
General Information About
Bluetooth
®
i Bluetooth-capable devices must
correspond to a particular profile to be
connected to COMAND. Every Bluetooth
device has a Bluetooth-specific name.
Bluetooth ® technology is the standard for
short-range wireless data transmission of up
to approximately 30 feet. Bluetooth
® can be
used to exchange vCards, for example.
Bluetooth
® is a registered trademark of the
Bluetooth Special Interest Group (SIG) Inc.
42
Bluetooth
System Settings