At a glance, Multifunction steering wheel – Mercedes-Benz G-Class 2010 COMAND Manual User Manual
Page 28

Operating DVD Changer, Music Register,
Memory Card, Media Interface
Selecting a track or scene
X
From COMAND select a source from the
Audio menu.
X
Press button V or U repeatedly until
the audio source currently being played
appears in the multifunction display.
X
Selecting previous or next track: Press
button * or & briefly.
X
Selecting a track from the track list
(quick search): Press and hold * or
&.
i
Track selection may depend on selected
settings in COMAND or the connected
device.
NAVI Menu
The NAV menu contains the functions needed
to operate your navigation system.
X
Press button V or U repeatedly until
you see the message
NAV in the
multifunction display.
The message shown in the multifunction
display depends on the status of the
navigation system:
R
with COMAND switched off, the message
NAV OFF appears in the multifunction
display.
R
with COMAND switched on but route
guidance not activated, the direction of
travel and, if applicable, the name of the
street currently traveled on appear in the
multifunction display.
R
with COMAND switched on and route
guidance activated, maneuver instructions
appear in the multifunction display.
Tel Menu
A driver's attention to the road must always
be his/her primary focus when driving. For
your safety and the safety of others, we
recommend that you pull over to a safe
location and stop before placing or taking a
telephone call. If you choose to use the mobile
phone while driving, please use the handsfree
device and only use the mobile phone when
weather, road, and traffic conditions permit.
Some jurisdictions prohibit the driver from
using a cellular mobile phone while driving a
vehicle.
Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your vehicle is
covering a distance of 44 feet (approximately
14 m) every second.
You can use the functions in the
Tel menu to
operate your mobile phone, provided it is
connected to a handsfree system and
switched on.
X
Switch on the mobile phone and COMAND
(
X
Press button V or U on the steering
wheel repeatedly until the
TEL menu
appears in the multifunction display.
Which message appears in the multifunction
display depends on your mobile phone's
authorization and on/off status:
R
If the mobile phone has not yet been
authorized, the message in the
multifunction display is:
BLUETOOTH
READY.
R
If the mobile phone is switched on and
authorized, the message in the
multifunction display is:
READY.
Answering a Call
When your mobile phone is ready to receive
calls, you can answer a call at any time. In the
multifunction display you will see a
corresponding message or, if available, the
caller ID (name and number):
X
Press button 6.
You have answered the call.
26
Multifunction Steering Wheel
At a Glance