Functions during a single call, Telephone, Making calls – Mercedes-Benz G-Class 2010 COMAND Manual User Manual
Page 110
Redialing
X
X
Select ° at the bottom right-hand side of
the speller.
or
X
Press the 6 button on the COMAND
control unit when the phone main menu is
displayed.
The dialed calls list appears. The call dialed
last will be at the top of the list.
X
To select a call: Press 9 or :
X
To initiate call: Press 9.
Initiating a Call to a Call List Entry or
COMAND Phone Book Entry
X
Open the call list and select an entry .
or
X
Open the COMAND phone book and select
an entry (
X
To initiate call: Press 9.
Functions During a Single Call
Phone mode with a single call
1
Other party
2
Symbol for active phone connection
3
Switches the hands-free microphone off
or on
4
Sends DTMF tones (not possible with all
mobile phones)
5
Device name of the connected mobile
phone
6
Terminates call
Switching Hands-Free Microphone On
or Off
X
X
To switch off: Select Mic Off.
If the microphone is switched off, the >
icon appears in the main area.
X
To switch on: Select Mic On.
The > symbol disappears.
DTMF Tone Transmission
i
This function is not possible with all
mobile phones.
Answering machines or other devices can be
controlled by DTMF tones, e.g. for remote
query functions.
X
To send individual characters: During a
call select the required characters using
the ; or = button.
or
X
Press the corresponding button on the
COMAND control unit keypad.
Every character selected will be
transmitted immediately.
X
Transmitting phone book entry as a
sequence of characters: Select Name.
X
Select the desired phone book entry.
The entry is transmitted immediately as a
sequence of characters.
X
To switch back to the call display: Select
Back.
108
Making Calls
Telephone