Mercedes-Benz G-Class 2010 COMAND Manual - Manual (Page 153)

X To select an option: Select Media
Interface in the basic display.
The option list appears. A R dot indicates
the option selected.
X Select an option.
Audio Aux
An external audio source (Aux) can be
connected to COMAND via the 1/8 inch jack
1 located inside the glovebox.
Switching to Audio Aux Mode
From Another Main Function
X Select Audio£Audio£Aux in the audio
menu display.
i If the last mode was audio Aux mode, you
only need to select Audio.
Within the Audio Function
X Select Audio£Aux.
The Audio Aux menu appears. The medium
in the external audio source is heard,
provided it is connected and switched to
playback.
i Please see the corresponding operating
instructions on how to operate the external
audio source.
External audio sources may have different
signal levels. You can choose between two
different input gain levels for the Aux input.
R
Standard
To be used for external audio sources with
a medium to high signal level.
R
Boost
To be used for external audio sources with
a low signal level.
X To set the desired input gain level:
Select
Volume£Standard or Boost.
You can set the following sound properties in
audio Aux mode:
R
Volume ( Y page 32)
R
Balance and fader ( Y page 33)
R
Treble and bass ( Y page 32)
R
Surround sound ( Y page 33)
Audio Aux
151
Audio
Z