Language setting, Display settings, Adjusting brightness – Mercedes-Benz G-Class 2010 COMAND Manual User Manual
Page 42: Setting the display design, Read-out, Setting reading speed, System settings
X
Press : or 9 to select the
appropriate time zone.
X
To switch between Daylight Saving and
Standard Time: Select Daylight
Saving Time (Summer) or Standard
Time (Winter).
The R dot indicates the current setting.
X
To save setting and exit menu:
Press = or ;.
This function allows you to determine the
language for the menu displays and the
navigation messages. The language selection
affects the input options in the editing and
smart speller.
X
Select
System£Settings£Language.
The language list appears. The R dot
indicates the current setting.
X
To change setting: Press : or 9 to
select the desired language.
X
To confirm the language selection:
Press 9.
COMAND loads the selected language and
sets it.
Adjusting Brightness
X
Select
System £ Settings £ Display
£ Brightness.
1
Brightness bar
X
To adjust brightness: Press 9
or :.
The brightness bar moves up or down.
X
To confirm selection: Press 9 or press
=.
or
X
Press the k button.
Setting the Display Design
X
Select
System£Settings£Display.
X
Select
Day mode, Night mode or
Automatic.
The R dot indicates the current setting.
i
In the
Automatic setting, COMAND
evaluates the automatic vehicle light
sensor and automatically switches over the
display design.
Setting reading Speed
X
Select
System£Settings£Text
Reader Speed.
The list of possible settings appears. The
R dot indicates the current setting.
X
Select the desired speed.
X
To confirm your selection: Press 9.
40
Read-Out
System Settings