Navigatio n, Entering points of interest – Mercedes-Benz GLK-Class 2011 COMAND Manual User Manual
Page 66
subcategory of the RESTAURANT main
category and which lie within the search
radius.
Point of interest list
Introduction
The illustration below shows an example of
the points of interest list for the
RESTAURANT main category and BREWPUB
subcategory in the vicinity of the current
position.
:
Point of interest
;
Compass heading to the point of interest
=
Linear distance to the point of interest
?
Selected category or subcategory
i
Depending on the point of interest
selected, COMAND uses different
reference points in determining the linear
distance to the destination:
R
vicinity of current position: the linear
distance is the distance of the point of
interest from the current vehicle
position.
R
vicinity of destination: the linear distance
is the distance of the point of interest
from the destination entered.
Selecting a point of interest
X
Select a point of interest by turning cVd
the COMAND controller and press W to
confirm.
The full address of the point of interest
selected appears.
:
Point of interest with address
;
To start route calculation
=
To store an address in the destination
memory
?
To display details
A
To make a call (when available)
B
To cancel selection
C
To show an address on the map
X
To start route calculation: select Start
and press W to confirm.
X
To store an address in the destination
memory: select Save and press W to
confirm. You can now select storage
options (
Y
page 81).
X
To show the detailed view: select
Details and press W to confirm.
X
To connect a call: select Call and press
W to confirm (available if the point of
interest entry contains a phone number).
COMAND switches to telephone mode
(
Y
page 105).
X
To call up the map: select Map and press
W to confirm.
X
You can move the map and select the
destination (
Y
page 59).
64
Entering points of interest
Navigatio
n
ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US
d2irenkl
Version: 3.0.3.6
2010-05-31T09:21:57+02:00 - Seite 64