Mercedes-Benz GLK-Class 2011 COMAND Manual - Manual (Page 102)

therefore recommended that you change
this name so that you can easily recognize
your mobile phone (see the mobile phone
operating instructions).
X
Switch on the mobile phone and enter the
PIN when prompted to do so (see the
mobile phone operating instructions).
X Activate Bluetooth ® functions and, where
necessary, Bluetooth ® visibility on the
mobile phone (see the mobile phone
operating instructions).
COMAND
X Activate the Bluetooth ® function in
COMAND (
Y
page 42).
Connecting a mobile phone
General information
Before using your mobile phone with
COMAND for the first time, you will need to
connect it.
When you authorize a new mobile phone, it is
connected automatically.
Connecting comprises:
R searching for a Bluetooth ® -capable mobile
phone
R subsequently authorizing it
You can connect up to ten mobile phones.
Searching for a mobile phone
X Press the ÷ function button on COMAND.
X Select Phone in the telephone basic menu
by sliding VÆ and turning cVd the
COMAND controller and press W to
confirm.
X Select Bluetooth Phones and press W to
confirm.
X Select Update and press W to confirm.
COMAND searches for Bluetooth
®
telephones within range and adds them to
the Bluetooth ® telephone list.
The duration of the search depends on the
number of Bluetooth ® telephones within
range and their characteristics.
Example of display: Bluetooth ® telephones list
: Currently connected # and authorized
mobile phone Y
; Device not within range but previously
authorized (L appears in gray)
= Newly detected mobile phone within
range but not yet authorized (no icon yet
Y)
The Bluetooth ® telephones list shows all
mobile phones within range and all previously
authorized mobile phones, whether or not
they are in range.
i If the Bluetooth ® telephones list is already
full, you will be requested to de-authorize a
mobile phone (
Y
page 102). If COMAND
does not find your mobile phone, external
authorization (
Y
page 101) may be
necessary.
i When called up again, the telephone list
may no longer show all mobile phones
because, for example, a mobile phone has
been removed from the vehicle in the
meantime. In this case, start a new search
to update the Bluetooth ® telephone list.
100 Telephony via the Bluetooth ® interface
Telep
hone
ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US
d2irenkl Version: 3.0.3.6
2010-05-31T09:21:57+02:00 - Seite 100