Mercedes-Benz GLK-Class 2011 COMAND Manual - Manual (Page 126)

Registering satellite radio
X Switch on satellite radio mode
(
Y
page 124).
The satellite radio main menu appears
showing the weather channel. You cannot
select any other stations.
X Select Sat Radio in the lower menu bar
and press W to confirm.
X Select Service and press the 9 button to
confirm.
The service information screen appears.
Service information screen
1
Provider's phone number (SIRIUS XM)
2 SIRIUS XM ID of your satellite receiver
X Call the phone number of your satellite
radio provider shown on the screen.
i You can also have the satellite service
activated online. To do so, visit the SIRIUS
XM Radio website at
http://www.sirius.com (USA) or
http://www.siriuscanada.com
(Canada).
Once the connection has been established:
X Follow the instructions of the service staff.
The activation process may take up to ten
minutes. If the activation is completed
successfully, the No Service message
appears in the display, followed by the
satellite radio main menu.
i If registration is not included when
purchasing the system, your credit card
details will be required to activate your
account.
If the satellite receiver is not installed or is
not installed correctly, the Device
Unavailable message will appear.
Switching to satellite radio mode
Notes
You can also use the multifunction steering
wheel to tune in channels or scroll through
lists, e.g. by pressing the =;
9: buttons (
Y
page 21).
Important notes on registration, see
"Registering satellite radio" (
Y
page 124).
Option 1
X Press the ó function button.
The No Service message appears when
starting up or if no signal is being received.
Once COMAND receives the signal, the
satellite radio display appears. The station
last selected is played.
i Repeatedly pressing this function button
switches between the FM, AM, WB
wavebands in that order and then switches
to satellite radio mode. Pressing the button
again takes you back to FM radio mode.
Option 2
X Select Audio in the main function bar by
sliding ZV and turning cVd the COMAND
controller and press W to confirm.
If satellite radio mode was the last mode
selected, it will now be active.
If another audio mode is switched on, you
can now switch to satellite radio mode in
the audio menu.
124
SatRadio
Audio
ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US
d2irenkl Version: 3.0.3.6
2010-05-31T09:21:57+02:00 - Seite 124