Telephone, Telephony via the bluetooth, Interface – Mercedes-Benz GLK-Class 2011 COMAND Manual User Manual
Page 101

R
pressing the 6 or ~ button on the
multifunction steering wheel
R
using the Voice Control System (see the
separate Voice Control System operating
instructions).
Unless stated otherwise, the descriptions and
illustrations in this section refer to COMAND.
Function restrictions
You cannot use the phone yet in the following
situations:
R
the telephone automatically attempts to
log into a network. If no network is
available, you will not be able to make a
"911" emergency call. If you attempt to
make an outgoing call, the No Service
message will appear for a short while.
"911" emergency call
G
Warning
The 911 emergency call system is a public
service. Using it without due cause is a
criminal offense.
The following conditions must be fulfilled in
order to make a 911 emergency call:
R
the mobile phone must be switched on.
R
a network must be available.
R
a valid and operational SIM card must be
inserted in the mobile phone.
R
the mobile phone is connected to COMAND
via Bluetooth
®
.
If you cannot make an emergency call, you
must arrange rescue measures yourself.
X
Enter the digits in COMAND (
Y
page 104).
X
Press the K button.
The telephone makes the connection.
X
Wait until the emergency call center
answers and describe the emergency
situation.
Telephony via the Bluetooth
®
interface
Conditions
Mobile phone
For telephony via COMAND's Bluetooth
®
interface, a Bluetooth
®
-capable mobile
phone is required.
i
Not all mobile phones available on the
market are equally suitable. You can obtain
more detailed information about suitable
mobile phones and about connecting
Bluetooth
®
-capable mobile phones to
COMAND on the Internet at
http://www.mbusa-mobile.com. Or call
the Mercedes-Benz Customer Assistance
Center at
1-800-FOR-MERCedes (1-800-367-6372)
(for the USA) or Customer Relations at
1-800-387-0100 (for Canada).
The battery of the mobile phone should be
kept sufficiently charged in order to prevent
malfunctions.
In preparation for telephoning via the
Bluetooth
®
interface, you should check the
following items on your mobile phone (see the
mobile phone operating instructions):
X
Hands-Free Profile
The mobile phone must support Hands-
Free Profile 1.0 or above.
i
Some displays (e.g. the signal strength)
depend on the supported version of the
Hands-Free Profile.
X
Bluetooth
®
visibility
On certain mobile phones, the device itself
must be made "visible" for other devices,
as well as activating the Bluetooth
®
function (see the mobile phone operating
instructions).
X
Bluetooth
®
device name
Every Bluetooth
®
device has its own
Bluetooth
®
device name. The device name
may be changed, but can be identical for all
devices from the same manufacturer. It is
Telephony via the Bluetooth
®
interface
99
Telephone
ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US
d2irenkl
Version: 3.0.3.6
2010-05-31T09:21:57+02:00 - Seite 99
Z