Audio, Radio mode – Mercedes-Benz GLK-Class 2011 COMAND Manual User Manual
Page 123

Switching wavebands
Option 1
You can switch the radio between the FM, AM
and WB waveband.
X
Press the ó function button repeatedly
until the desired waveband is selected.
i
Repeatedly pressing this function button
switches between the FM, AM and WB
wavebands in that order and then calls up
SatRadio mode. Pressing the button again
takes you back to FM radio mode.
Option 2
X
Select FM, AM or WB in the radio display by
sliding VÆ and turning cVd the COMAND
controller and press W to confirm.
You will hear the last station on the
selected waveband.
Selecting a station
Selecting stations using the station
search function
X
Press the E or F button.
or
X
Turn cVd or slide XVY the COMAND
controller while the display/selection
window in the radio display is active.
Station search scans up or down and stops
at the next station found.
Selecting stations via the station
presets
X
Quick setting: press a number key, e.g.
H.
X
To select directly within the station
presets: select Presets by sliding VÆ and
turning cVd the COMAND controller and
press W to confirm.
or
X
Press W the COMAND controller when the
display/selection window is active.
The station preset menu appears. The #
dot indicates under which preset the
currently selected station is stored.
X
Select a station by turning cVd and press
W to confirm or press a number key, e.g.
H.
Tuning in stations by entering the
frequency manually
X
Option 1: press the õ button.
X
Option 2: select Radio in the radio display
by sliding VÆ and turning cVd the
COMAND controller and press W to
confirm.
X
Select Enter Frequency and press W to
confirm.
Irrespective of the option used, an input
menu will appear.
X
Enter a frequency using the number keys.
COMAND tunes in to the frequency
entered.
Waveband
Frequency
AM (MF)
530 – 1700 kHz
FM (VHF)
87.7 – 107.9 Mhz
WB (Weather Band) Weather report
channels
i
You can only enter currently permitted
numbers.
i
If you enter a frequency in the FM or AM
wavebands which is outside the frequency
range, COMAND tunes in to the next lower
frequency.
Radio mode
121
Audio
ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US
d2irenkl
Version: 3.0.3.6
2010-05-31T09:21:57+02:00 - Seite 121