Mercedes-Benz GLK-Class 2011 COMAND Manual - Manual (Page 170)

The following functions affect only one
screen:
R audio and video functions as well as picture
settings
R switching between full screen and the
menu
Switching between operating modes
The current settings are saved when you exit
an operating mode (e.g. audio CD mode). If
you call up this operating mode again later,
there are two possibilities:
R the operating mode has been adjusted on
the other screen.
R the operating mode has not been adjusted.
In the first case, the operating mode appears
as it is on the other screen.
In the second case, the setting appears on the
screen as it was when you last exited the
operating mode.
Picture settings
Overview
You can select these settings in video DVD
and AUX mode. Instructions for AUX mode
are detailed later (
Y
page 178).
Adjusting the brightness, contrast and
color
X Switch on video DVD mode (
Y
page 174).
X To show the menu: press the 9 button
on the remote control.
or
X Select Menu while the navigation menu
(
Y
page 154) is shown and press the 9
button to confirm.
X In both cases, select DVD-Video using
the :=; buttons and press the
9 button to confirm.
X Select Brightness, Contrast or Color
using the 9: buttons and press the
9 button to confirm.
A setting scale appears.
X Select a setting using the 9:
buttons and press the 9 button to confirm.
Changing the picture format
X
To show the menu: press the 9 button
on the remote control.
or
X Select Menu while the navigation menu
(
Y
page 154) is shown and press the 9
button to confirm.
X Select DVD-Video using
the :=; buttons and press the
9 button to confirm.
The ä icon in front of one of these menu
items – 16:9 Optimized, 4:3 or
Widescreen – indicates the currently
selected format.
X Select a format using the 9:
buttons and press the 9 button to confirm.
System settings
Notes
You can set all system settings individually for
each screen without affecting the other
screen. You make these settings using the
remote control.
Selecting the display language
X Select System using the 9=;
buttons on the remote control and press
the 9 button to confirm.
The system menu will appear on the
selected rear-compartment screen.
168
System settings
Rear
Seat
System
ZA COMAND NTG4.0 BR204 USA Edition A 2011; 1; 3, en-US
d2irenkl Version: 3.0.3.6
2010-05-31T09:21:57+02:00 - Seite 168