Losi LOSB9595 User Manual
Page 3
Instructions for Losi Xcelorin 36
th
Electronic Speed Control / Motor
Page 3 of 8
Specifications:
1/36 10250Kv Brushless Motor
• Sensorless Design
• Input volt: 2-Cell LiPo, 4- to 6-Cell NiMH
• Shaft Length: 4.6mm
• Shaft Diameter: 0.06” (1.5mm) with splines
• Dimension: 0.47” X 0.87” (12 x 22mm) (L X D)
• Weight: 0.30 oz / 8.5 g
• Motor connectors: 2mm gold plated bullet
1/36 Electronic Speed Control (ESC)
• Sensorless Design
• Input voltage:
o
NiMH: 4- to 6-cells
o
LiPo: 2-Cell Li-Poly
• LVC cut-off:
o
NiMH: 3.3V
o
LiPo: 6V
(3.0V/cell)
• BEC: 5V / 1A
• Operation frequency: 8KHz
• Operating current: 6A cont, 9A peak (3 Sec)
• Dimensions: 1.24” X 1.0” X 0.65” (31.6 X 25.5 X 16.5mm) (W, L, H)
• Weight: 0.25 oz / 7 g
• Standard Losi Micro Vehicle
plug supplied for power connection
• 2mm gold bullet connectors supplied for motor
Warnings:
• Read all safety precautions prior to each use.
• Never leave this product unsupervised while it is switched on, in use or just
connected to a power source. If there is a short or product defect, it could
result in fire.
• This is a High Performance Brushless System
o
Please disconnect motor or remove the pinion gear during ESC
calibration functions.
o
Keep loose clothing, hair, gloves and fingers away from the moving
parts at all times
o
Rubber tires will expand to a large diameter when the vehicle is not on
a running surface.