1 introduction, Introduction, 1introduction – Kontron pITX-E38 User Manual
Page 7
KTD-N0904-D
Page 5
Introduction
pITX-E38 Users Guide
1
Introduction
This manual describes the pITX-E38 boards made by KONTRON Technology A/S. In this manual the boards
will also be denoted E38.
The E38 boards are based on Intel Atom E38xx SoC (System on Chip) “Intel Bay Trail” and will be available
in three versions. The three types of boards are listed in this table:
Feature
pITX-E3815
pITX-E3826
pITX-E3845
Bay Trail SoC
E3815 (1 core) E3826 (2cores) E3845 (4 cores)
Kontron PN
810602-4500
810601-4500
810600-4500
Core speed
1,46GHz
1,46GHz
1,91GHz
Cooling (integrated)
Passive
Passive
Active
Battery module
Included
Included
Included
Total Design Power
5W
7W
10W
Use of this Users Guide implies a basic knowledge of PC-AT hard- and software. This manual is focused on
describing the E38 board’s special features and is not intended to be a standard PC-AT textbook.
New users are recommended to study the short installation procedure stated in the following chapter
before switching-on the power.
All configuration and setup of the CPU board is either done automatically or manually by the user via the
BIOS setup menus. Only exceptions are the “Clear CMOS” Jumper and the “Always On” jumper.
Latest revision of this manual, datasheet, BIOS, drivers, BSP’s (Board Support Packages), Mechanical
drawings (2D and 3D) can be downloaded from here:
Battery Module:
PN 1055-7645
Active cooler: