Kontron pITX-E38 - Manual (Page 14)

KTD-N0904-D Page 12 System Specification
pITX-E38 Users Guide
System Memory Support 3.1
The pITX-E38 has 1x DDR3L SODIMM 204 pin socket supporting single-channel unbuffered
DDR3L 1066/1333MHz (PC3L-8500/PC3L-10600). pITX-E3815/E3826 supports only
DDR3-1066MHz. Up to 4GB (Intel specification) however Kontron has qualified 8GB.
(ECC not supported).
Note: If using 32bit OS then less than 4GB in displayed in System Properties
(Shared Video Memory/PCI resources is subtracted, Windows 32b report 2.88GB free)
Kontron offers the following memory modules for support of the temperature range -25
⁰C to 75⁰C:
P/N 1055-9445: 1GB DDR3L 1600 PC3L-12800
P/N 1055-9446: 2GB DDR3L 1600 PC3L-12800
P/N 1055-9447: 4GB DDR3L 1600 PC3L-12800
P/N 1055-9448: 8GB DDR3L 1600 PC3L-12800
Kontron offers the following memory modules for support of the temperature range 0 ⁰C to 60⁰C:
P/N 1055-9939: 2GB DDR3L 1600 PC3L-12800
P/N 1055-9941: 4GB DDR3L 1600 PC3L-12800
P/N 1055-9942: 8GB DDR3L 1600 PC3L-12800
Memory modules have in general a much lower longevity than embedded motherboards, and therefor EOL
of modules can be expected several times during lifetime of the motherboard. Kontron guarantees that the
above P/N will be maintained so that EOL module will be replaced by other similar type of qualified module.
As a minimum it is recommend using Kontron memory modules for prototype system(s) in order to prove
stability of the system and as for reference.
For volume production you might request to test and qualify other types of RAM. In order to qualify RAM it
is recommend configuring 3 systems running RAM Stress Test program in heat chamber at 60
⁰C or 75⁰C
(depending on the requested maximum temperature) for a minimum of 24 hours.