Kontron pITX-E38 - Manual (Page 10)

KTD-N0904-D Page 8 System Specification
pITX-E38 Users Guide
3 System Specifications
Component main data 3.1
Form factor pITX (picoITX) 100 mm by 72 mm
Processor Intel Bay Trail FCBGA1170 Type 3 27x25mm 0.593 Ball Pitch.
Three versions available:
E3815 (1 core), 1,46GHz, 5W
E3826 (2 core), 1,46GHz, 7W
E3845 (4 core), 1,91GHz, 10W
Memory 1x DDR3L SODIMM socket supporting single-channel unbuffered DDR3L 1066/1333MHz
(PC3-8500/PC3-10600). pITX-E3815/E3826 supports only DDR3-1066MHz. Up to 4GB
(Intel specification) however Kontron has qualified 8GB. (ECC not supported).
Lan 1x Gbe LAN Intel I210 ”Springville”
DP DP (DisplayPort) v1.1a
Intel® Gen7 Graphics, OpenGL 3.0, OpenCL 1.2, DX11, H.264, MPEG2, MCV, VC-1, VP8
LVDS LVDS panels up to 2 pixels per clock, 24 bit colors (VESA/JEIDA). Based on DP to LVDS
converter type PTN3460BS.
USB • 1x USB3.0/2.0 (IO area, lower port)
• 1x USB2.0 (IO area, upper port)
• 2x USB2.0 (internal)
Serial 2x Serial ports (RS232) (TTL only) on internal 5-pin connector
Sata 1x SATA2.0
GPIO 10 x GPIOs (General Purpose I/Os), (via GPIO connector)
MicroSD Card 1x MicroSD Card Slot
mPCIe or
mSATA
1x mPCIe (miniPCI Express) or 1x mSATA (miniSATA). Full- or halfsize formfactor. (No
USB included)
Hardware
Monitor
Subsystem
• Fan control system support Thermal cruise (fixed temperature limit, no BIOS setup).
• Thermal inputs: PCB near SoC temperature (precision +/- 3ºC).
• System temperature sensor (precision +/- 0.5ºC)
Power Supply
Unit
+5V single supply via either Vin-Int. (4-pin connector) or Vin-Ext. connector (DC
Connector RA 2mm locking type)
Audio HDA Codec IDT 92HD73C1T5PRGIC1X8:
• 1x Stereo Line in
• 1x Stereo Line out
• 1x Mic in