Kontron KTA75-FLEX - Manual (Page 86)

KTD-N0861-B Page 78 BIOS - Security
KTA75/Flex Users Guide
KTA70M/mITX Users Guide
9.5 Security
Aptio Setup Utility – Copyright © 2012 American Megatrends, Inc.
Main Advanced Chipset Boot Security Save & Exit
Password Description
If ONLY the Administrator’s password is set,
then this only limits access to Setup and is
only asked for when entering Setup.
If ONLY the User’s password is set, then this
is a power on password and must be entered to
boot or enter Setup. In Setup the User will
have Administrator rights.
The password length must be
in the following range:
Minimum length 3
Maximum length 20
░
░
Set Administrator Password
Administrator Password
User Password
System Mode state
Secure Boot state
Secure Boot
Secure Boot Mode
Setup
Disabled
[Enabled]
[Standard]
→← : Select Screen
↑↓ : Select Item
Enter: Select
+/- : Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Version 2.15.1227. Copyright © 2012 American Megatrends, Inc
Function Selection Description
Administrator Password
(See Password
description above)
Set Administrator Password
User Password
(See Password
description above)
Set User Password
Secure Boot
Disabled
Enabled
Secure Boot flow control.
Secure Boot is possible only if System runs in
User Mode.
Secure Boot Mode
Standard
Custom
Secure Boot mode selector.
Standard: fixed Secure boot policy.
Custom: changeable Image Execution policy and
Secure Boot Key databases.