Kontron KTA75-FLEX - Manual (Page 60)

KTD-N0861-B Page 52 BIOS - Advanced
KTA75/Flex Users Guide
KTA70M/mITX Users Guide
9.2.3 Advanced - Trusted Computing
Note: TPM State and Pending operation are only visible if Security Device Support is Enabled followed by
Save and Exit.
Aptio Setup Utility – Copyright © 2012 American Megatrends, Inc.
Advanced
Configuration
Security Device Support
TPM State
Pending operation
Current Status Information
TPM Enabled Status:
TPM Active Status:
TPM Owner Status:
[Enable]
[Enabled]
[None]
[Enabled]
[Activated]
[Unowned]
Enables or Disables BIOS support
for security device. O.S. will not
show Security Device. TCG EFI
protocol and INT1A interface will
not be available.
→← : Select Screen
↑↓ : Select Item
Enter: Select
+/- : Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Version 2.15.1227. Copyright © 2012 American Megatrends, Inc
Function Selection Description
Security Device Support
Disabled
Enabled
Enables or Disables BIOS support for security
device. O.S. will not show Security Device. TCG
EFI protocol and INT1A interface will not be
available.
TPM State
Disabled
Enabled
Enable/Disable Security Device. NOTE: Your
Computer will reboot during restart in order to
change State of the Device.
Pending operation
None
Enable Take Ownership
Disable Take Ownership
TPM Clear
Schedule an Operation for the Security Device.
NOTE: Your Computer will reboot during
restart in order to change State of Security
Device.