Kontron KTA75-FLEX - Manual (Page 16)

KTD-N0861-B Page 8 System Specification
KTA75/Flex Users Guide
KTA70M/mITX Users Guide
3.3 Power Consumption
On the following pages the power consumption of the KTA75 Board is measured under:
1- DOS, idle, mean
2- Windows 7, Running 3DMARK 2005 & BiT 6, mean
3- S1, mean
4- S3, mean
5- S4, mean
The following items were used in the test setup:
1. Low Power Setup:
Standard system configuration equipped with PCI card, internal graphics, 2x SATA HDD, AMD R-460H
@ 1.9GHz CPU, 1x DIMM (1GB Modules), CRT Monitor, Keyboard & Mouse. 1x 1-4GB USB Stick.
High Power Setup:
Standard system configuration equipped with PCI, PCIex1, PCIex16, miniPCIe WLAN or mSATA HDD, 4x
SATA HDD, AMD R-460H @ 1.9GHz CPU, 2x DIMM (2+2GB Modules), CRT Monitor, Keyboard & Mouse, 4x
4-8GB USB Sticks
2. 12V active cooler (BOX)
3. USB Keyboard/Mouse Genius
4. DELL 2407WFPg
5. 3.5” HDD WD
6. ATX Eurocase 450W
7. Tektronix TDS5104B
8. Tektronix TCPA300
9. Tektronix TCP312
10. Fluke 289
11. ATX Switcher
Note: The Power consumption of Monitor and HDDs is not included.
Warning: Hot Plugging power supply is not supported. Hot plugging might damage the board.
ATX supplies
KTA75 PSU
Gnd
Current
Probe Tektronix TDS5104B