Kontron KTA75-FLEX User Manual
Page 26
KTD-N0861-B
Page 18
Rear IO Connectors
KTA75/Flex Users Guide
KTA70M/mITX Users Guide
Notes:
In order to meet the requirements of USB standard, the 5V input supply must be at least 5.00V.
The contacts for USB devices are protected and suitable to supply USB devices with a maximum input current of
1000mA.
Do not supply external USB devices with higher power dissipation through these pinsTo protect the external power
lines of peripheral devices make sure that
- the wires have the right diameter to withstand the maximum available current.
- to enclosure of the peripheral device fulfills the fire-protecting conditions of IEC/EN 60950.
Signal
Description
USB12+ USB12-
RX12+ RX12-
TX12+ TX12-
USB13+ USB13-
RX13+ RX13-
TX13+ TX13-
Differential pair works as Data/Address/Command Bus.
5V/SB5V
5V supply for external device. SB5V is supplied during powerdown to allow wakeup on
device activity. Protected by current limited power distribution switch,1A for each port.