Kontron NetBootLoader - Manual (Page 85)

ID 1022-8317, Rev. 2.0
Command Syntax NetBootLoader
Page 77
TFTP
FUNCTION: Download file from a TFTP server
SYNTAX:
tftp [-e] [] []
where:
tftp command
-e option:
repeat tftp until download is successful
parameter: string
IP address of the TFTP server
parameter: string
name of image file to be downloaded, or
path and name of image file to be downloaded
DESCRIPTION: The TFTP command makes it possible to download a file to the data
buffer (of the currently specified core) from a TFTP server via an
Ethernet port. If used with the DHCP command, it is possible to use
the IP address and file information returned by the DHCP command.
If this command is issued without any parameters, it will use the
previously stored information returned with the DHCP command.
USAGE: Download a file from a TFTP server.
COMMAND / RESPONSE (none):
tftp 195.178.125.55 image2
This command downloads the file "image2" from the specified TFTP
server.