Kontron NetBootLoader - Manual (Page 48)

ID 1022-8317, Rev. 2.0
Command Syntax NetBootLoader
Page 40
FDT
FUNCTION: Enable creation of a flattened device tree (FDT)
SYNTAX:
fdt []
where:
fdt command
parameter: numeric string
0,1
when set to 0 (zero) disables creation of an FDT,
image is booted from 0x100
when set to 1 (one) enables creation of an FDT,
image is booted from 0x0
when not specified, displays current setting
DESCRIPTION: This command is used to specify the creation of an FDT for an
operating system if required.
An FDT is required for Linux kernels 2.6.17 and later.
USAGE: Create an FDT
COMMAND / RESPONSE:
NetBtLd> fdt 1
Enabling creation of flattened device tree.
Boot image from address 0.
NetBtLd>
Display the current FDT setting
COMMAND / RESPONSE:
NetBtLd> fdt
Creation of flattened device tree is enabled.
Image is booted from address 0.
NetBtLd>