Kontron NetBootLoader - Manual (Page 52)

ID 1022-8317, Rev. 2.0
Command Syntax NetBootLoader
Page 44
INFO
FUNCTION: Display system information
SYNTAX:
info
DESCRIPTION: The command INFO is used to display an information summary for
the running system.
Images programmed using the “-o” option of the command LF are not
shown.
USAGE: Display system information
COMMAND / RESPONSE:
NetBtLd> info
CPU : PowerPC, MPC8641D
Board : AM4101
Mode : SMP
PCIe : available
sRIO : available
Ram : 80000000
Flash :
Name : AMD 29LV320
Bank : 0
Bytelane : 0
BankPortsize : 16
ChipPortsize : 16
Offset : 0x0
Size : 0x400000
NetBootLoader used FLASH: 0x0 - 0xa0000
Sector usage map is calculated, this might
take some time.
Sector usage map (Sector Size = 0x10000):
0x0000: nnnnnnnn nn000000
0x0010: 00000000 00000000
0x0020: 00000111 11111111
0x0030: ........ ........
NetBtLd>
Where: n = NetBootLoader; 0 = image 0; 1 = image 1; . = usage un-
known