Kontron NetBootLoader - Manual (Page 60)

ID 1022-8317, Rev. 2.0
Command Syntax NetBootLoader
Page 52
MD
FUNCTION: Display visible memory
SYNTAX:
md []
where:
md command
parameter: hexadecimal
<[x … ]x>
starting address of a visible memory area
DESCRIPTION: To display a visible memory area the command MD is used. The first
time the command MD is issued, visible memory contents starting at
the address 0x0 are displayed if no “” parameter is used. If
issued again without the “” parameter, the display starts with
the end address of the previous display. Data is displayed as
hexadecimal 32-bit words and as ASCII dump.