Kontron NetBootLoader - Manual (Page 31)

ID 1022-8317, Rev. 2.0
Command Syntax NetBootLoader
Page 23
4. Command Syntax Reference
The following provides command syntax reference information, a short description, and, in
some cases, usage examples. For some commands, not all products have the exact same
command syntax as indicated here. Use the HELP command, to ascertain the command syn-
tax for the product in use.
Where an ellipsis (…) appears in the command syntax it means that the command is continued
from the previous line. Observe any spaces that may be between the ellipsis and the remainder
of the command.
ABORT
FUNCTION: Terminate the NetBootLoader boot operation
SYNTAX:
abort
DESCRIPTION: This command is used by the operator to terminate the boot
operation during the boot wait time to allow the operator to perform
other NetBootLoader operations. To be asserted, either it must be
issued during the boot wait time, or be issued as a script command
once the bootwait time has elapsed.