Command syntax netbootloader, Assign (asmp) – Kontron NetBootLoader User Manual
Page 32
ID 1022-8317, Rev. 2.0
Command Syntax
NetBootLoader
Page 24
ASSIGN
(ASMP)
FUNCTION:
Assign devices to the core specified or display the current
assignments
SYNTAX:
assign [default |
where:
assign
command
issuing the command without arguments will dis-
play the current assignment for both cores
default
option:
set the default assignment
parameter: string
0, 1
defines the core to which the device(s) specified
is(are) to be assigned
parameter: string
<[x … ]x>
defines the device(s) to be assigned
all
option:
assigns all devices to core specified
DESCRIPTION:
The ASSIGN command provides for selective ordering of a given
device to one or the other of the cores.
The default device assignment is as follows:
Only one core at a time may be addressed, however, more than one
device may be assigned at a time for a given core.
device: core
i2c: 0
eth0: 0
eth1: 0
eth2: 0
eth3: 1
ser0: 0
ser1: 1
device: core
pci: 0
srio: 0
ide: 0
dma0: 0
dma1: 0
dma2: 0
dma3: 0