Kontron NetBootLoader - Manual (Page 41)

ID 1022-8317, Rev. 2.0
Command Syntax NetBootLoader
Page 33
CLONE (Two NBL Flashes)
FUNCTION: Program the NetBootLoader to NBL Flash memory
SYNTAX:
clone [-n] [-a] [-y]
where:
clone command
-n option:
program from data buffer
to program from either the active or inactive NBL
Flash memory, do not specify this option
-a option:
specify this option to program the active NBL Flash
memory (if -n is not specified, source is the inactive
NBL Flash memory)
to program the inactive NBL Flash memory, do not
specify this option (if -n is not specified, source is
the active NBL Flash memory)
-y option:
this option is used with the SCRIPT command or in
“nbl.cfg” or “net.cfg” files to confirm that cloning
is to be performed
DESCRIPTION: To update the NetBootLoader itself, the command CLONE is used.
The image source for programming is either the data buffer (-n) (of
the currently specified core) or one or the other of the two NBL Flash
memories depending on the “-a” option selection.
The new image is checked for validity. If an image is invalid, the
update is aborted.
Further, the operation must be confirmed by typing the word “yes”.
Any other or no input will cancel the operation.
When used with the SCRIPT command, the -y option must be
specified or the clone operation will be terminated.