Kontron NetBootLoader - Manual (Page 66)

ID 1022-8317, Rev. 2.0
Command Syntax NetBootLoader
Page 58
NET (AMC)
FUNCTION: Set or display the parameters for an Ethernet port
SYNTAX:
net [] []
… [-netmask ] [-gw ]
… [-a] [-f]
where:
net command
parameter: numerical string
0, 1 ... n
logical identifier of Ethernet port addressed by this
command
where: 0 = TSEC1
1 = TSEC2
2 = TSEC3
3 = TSEC4
parameter: string
IP address of NetBootLoader
-netmask option: netmask
parameter: string
netmask of NetBootLoader
-gw option: gateway
parameter: string
gateway address for network
-a option:
specifies that the NetBootLoader is to use this port
for network operations
-f option:
force CRC update