Compaq GS160 - Manual (Page 158)

8-18 AlphaServer GS80/160/320 User’s Guide
8.7.2 Displaying the System Status
The SCM status command displays the current SCM settings.
Table 8–2 explains the status fields.
SCM_E0> show status
System Management Settings
SCM escape sequence : ^]^]scm
Local Baud/flow control : 57600 / soft
COM1 Baud/flow control : 57600 / hard
Modem Baud/flow control : 57600 / hard
COM1 mode : Pass-through
OCP power switch : Off
OCP halt : Deasserted
OCP secure : Non-Secure
Remote access : Disabled
Remote user : Not Connected
Alerts : Disabled
Modem password : wffirmware
Modem init string : ate0v0&c1s0=2
Modem dial string : atdt915085551212
Modem alert string : ,,,,,,,5085551212#;
Alert pending : No
Most recent alert :
SCM_E0>
Table 8–2 Status Command Fields
Field Meaning
SCM escape sequence Currently defined escape sequence that returns you to
the SCM console. Default is “scm”.
Local Baud/flow
control Baud rate of the local port.
COM1 Baud/flow
control Baud rate of the system COM1 port.
Modem Baud/flow
control Baud rate of the system modem.