Compaq GS160 - Manual (Page 137)

Operation 7-25
The number of soft partitions is set to 3.
The set lp_io_mask0 1 command defines QBB0 (and its I/O risers) as
residing in partition 0.
Set lp_cpu_mask0 f assigns CPUs 0–3 to partition 0. The set
lp_mem_size0 6GB command assigns 6 GB of memory to partition 0.
Set lp_ io_mask1 6 defines QBB1 and QBB2 (and its I/O risers) as
residing in partition 1. The set lp_cpu_mask1 cf0 command assigns
CPUs 4–7, 10, 11 to partition 1. The set lp_mem_size1 16GB command
assigns 12 GB of memory to partition 1.
The set lp_ io_mask2 8 defines QBB3 (and its I/O risers) as residing in
partition 2. Set lp_cpu_mask1 f300 assigns CPUs 8, 9, 12-15 to partition
2. Set lp_mem_size1 10GB assigns 10 GB of memory to partition 2.
The set lp_shared_mem_size 4GB command assigns 4 GB of memory to
be shared by all partitions.
Set lp_error_target 0 assigns partition 0 to receive and process the error
interrupts.
The lpinit command completes the procedure and partitions the system.
As a final result of the commands entered in Example 7–6, you will have the
following soft partition setup:
Instance CPU Memory I/O
0 0, 1, 2, and 3 6 GB QBB 0
1 4, 5, 6, 7, 10, and 11 12 GB QBB 1 and QBB 2
2 8, 9, 12, 13, 14, and 15 10 GB QBB 3
4 GB (shared)