Compaq GS160 - Manual (Page 136)

7-24 AlphaServer GS80/160/320 User's Guide
At the SRM console prompt, you set values for one environment variable to
define the number of soft partitions in the system, one to set the memory mode,
and two for each partition that define the CPU and I/O modules in each
partition. The lpinit command completes the procedure.
Example 7–6 Defining Soft Partitions
P00>>> set lp_count 3
P00>>> set lp_io_mask0 1
P00>>> set lp_cpu_mask0 f
P00>>> set lp_mem_size0 6GB
P00>>> set lp_io_mask1 6
P00>>> set lp_cpu_mask1 cf0
P00>>> set lp_mem_size1 12GB
P00>>> set lp_io_mask2 8
P00>>> set lp_cpu_mask2 f300
P00>>> set lp_mem_size2 10GB
P00>>> set lp_shared_mem_size 4GB
P00>>> set lp_error_target 0
P00>>> lpinit