Compaq GS160 - Manual (Page 119)

Operation 7-7
7.2 Displaying the System Configuration
View the system hardware configuration from the SRM console. It is
useful to view the hardware configuration to ensure that the system
recognizes
all devices, memory configuration, and network
connections.
Use the following SRM console commands to view the system configuration.
Additional commands to view the system configuration are described in the
AlphaServer GS80/160/320 Firmware Reference Manual.
show boot* Displays the boot environment variables.
show config Displays the logical configuration of interconnects and buses
on the system and the devices found on them.
show device Displays the bootable devices and controllers in the system.
show fru Displays the physical configuration of FRUs (field-replaceable
units).
show memory Displays configuration of main memory.
7.2.1 Show Boot Command
Use the show boot* command to list the boot environment variables.
Example 7–2 Show Boot*
P00>>> show boot*
boot_dev
dka0.0.0.1.1
boot_file
boot_osflags
a
boot_reset OFF
bootdef_dev dka0.0.0.1.1
booted_dev
booted_file
booted_osflags