Specifications – Elecraft KAT100 User Manual

Page 36

Text mode
Original mode

Specifications

All measurements were made using a 13.8 V, 1-amp power supply.
Numeric values are typical; your results will be somewhat different.
Specifications are subject to change without notice.

L - C Ranges

L: approx. 0-20 µH in 256 steps;
C: approx. 0-2400 pF in 256 steps

Network Type

L-network (series L, shunt C);
C switchable to transceiver or antenna side

Antenna outputs

2, Unbalanced

SWR Range Matched

Up to 10:1 typ. (varies with band; smaller

range on lowest bands)

Tuning time

1 to 5 seconds typical for initial tune-up;
< 1/2 sec. to recall stored settings

SWR Display

1.0:1 to 9.9:1 (on K2 LCD);
1:1 to 5:1 on 10 front-panel LEDs

Enclosure Size

1.3" (H) x 7.8" (W) x 8.3" (D)
(3.3 x 19.8 x 21.0 cm)

Weight

Approx. 3 pounds (1.4 kg)

Supply voltage

10 to 15 VDC

Current Drain

200-300 mA typical; 700 mA max

All relays and LEDs on. This is very unlikely to occur; in normal use, the

maximum will be closer to 400-500 mA.