EFCO Special Purpose Windows Installation - Manual (Page 32)

EFCO CORPORATION 3/5/2014 PART NO. YW40 Page 3 of 3
Window Installation Instructions - Casement Window Installation Section -
Special Hardware Adjustment if the Casement has Lift Locks
Check and adjust keeper location after anchorage is completed.
Completely read the General Installation Instructions and all other sections which pertain
to your project before starting work. These recommendations are for general erection
procedures only. For actual job conditions, see the details on the shop drawings. For
perimeter anchor types and spacing, refer to the approved shop drawings or consult the
project design professional.
Centerline of
Top Screw Hole
Lock Pivot Point
Centerline of the keeper
must be below centerline of
the pivot point of the lock.
Centerline of
Top Screw Hole
Lock Pivot Point
Centerline of the keeper
must be below centerline of
the pivot point of the lock.