Dynojet 224x: Installation Guide - Manual (Page 45)

B A S I C D Y N O O P E R A T I O N
Loading the Vehicle
Version 4 Above Ground Model 224 Automotive Dynamometer Installation Guide
3-3
1 Verify your computer is running. Set the dyno brake on by pressing the red
button on the hand-held pendant.
2 Drive the vehicle onto the lift and raise the lift to the same height as the dyno.
3 Drive the vehicle onto the dyno and align the vehicle straight with the dyno.
4 Stop the vehicle when the drive axle is centered on the drum.
Do not drive your vehicle onto the deck of the dyno.
Figure 3-1: Center the Drive Axle on the Drum
center drive axle on dyno drum