Dynojet 224x: Installation Guide - Manual (Page 39)

I N S T A L L A T I O N
Deck Installation
Version 4 Above Ground Model 224 Automotive Dynamometer Installation Guide
2-19
11 Install the rear tube to the outer panels and deck supports using four
3/8-16 x 3-inch flange-hex bolts, four 3/8-inch flat washers, and four 3/8-inch
nylock nuts.
12 Install a plastic plug in each end of the tube.
13 Tighten all brace hardware.
Figure 2-15: Install the Rear Tube
AD222 rear tube
plug