Dynojet 224x: Installation Guide - Manual (Page 17)

S P E C I F I C A T I O N S A N D O P E R A T I N G R E Q U I R E M E N T S
Dynamometer Specifications and Requirements
Version 4 Above Ground Model 224 Automotive Dynamometer Installation Guide
1-7
E LECTRICAL R EQUIREMENTS
E NVIRONMENTAL R EQUIREMENTS
F IRE S UPPRESSION
Always have adequate fire suppression or fire extinguishers in your dyno room.
F ORKLIFT R EQUIREMENTS
You will need to provide equipment capable of lifting a minimum of 2,722 kg.
(6,000 lb.) to lift the dyno off the crate and into position in your dyno room. You will
also need a pair of straps capable of supporting 2,722 kg. (6,000 lb.) to attach to the
dyno. Dynojet recommends using single loop style straps.
P HONE AND I NTERNET A CCESS
Dynojet recommends you have a phone close to the dyno to call for assistance in an
emergency. You may also wish to contact Dynojet to troubleshoot your dyno.
Internet access on your computer is desirable for contacting Dynojet and
downloading new information and updates.
T IE -D OWN S TRAPS
Dynojet recommends using tie-down straps for securing the car on the dyno. The 224
dyno comes with an automotive tie-down package.
description specifications
Power Requirements: 4WD electronics 110v 60Hz or 240v 50Hz
Power Requirements: dyno electronics 110v 60Hz or 240v 50Hz
Power Requirements: air pump 110v 60Hz or 240v 50Hz
Power Requirements: computer 110v 60Hz or 240v 50Hz
Power Requirements: optional eddy
current brake
240v 30amp single phase circuit for each eddy current
brake
Refer to the Eddy Current Brake Installation and User
Guide for Model 224 Above Ground Automotive
Dynamometers (P/N 98215100) for more information.
description specifications
Temperature
operating min./max 10°C/50°C (50°F/122°F)
storage min./max 0°C/70°C (32°F/158°F)
Humidity 0 to 95% non condensing