Step 6: turbo/oil tank assembly installations – BoonDocker ARCTIC CAT: 2010-11 M8 Pump Gas User Manual
Page 9
BoonDocker Performance
www.boondockers.com
208-542-4411
2010 M8 Turbo Kit Instructions
9
J. Turn the sled on its side and install the heat deflector plate as shown in picture, fasten
using the factory bolts
Step 6: Turbo/Oil Tank
Assembly Installations
Parts Needed: Tools Needed:
Turbo/Oil Tank Assembly
Basic Tool Kit
A. Mount the oil tank/ turbo assembly to the sled using the stock exhaust can mounts as
shown in picture.
Install rubber grommet from
stock exhaust.
This manual is related to the following products: